Rigid PIPEHarness™ - Thermometric & Pyrometric CT, CPT & CTT & PRY

Rigid PIPEHarness™ - Thermometric & Pyrometric CT, CPT & CTT & PRY

Our PIPEHarness™ systems, first patented in 1972, set the global industry standard for robustness. CMR provides thermometric and pyrometric engine wiring solutions for engines and gensets in industrial and marine markets.

thermometric or pyrometric pipe harness
Operating Temperature Range
Min -50°C / Max 85°C (100 hours at 125°C)
Electrical Connection
• Internal wiring is designed according to each application. For thermocouples, it can be either common negative or wire to wire. A PT 100 sensor can be installed for the cold junction temperature compensation
• Each base is wired to the main male connector with high temperature PVC insulated cable
• The pipe is fitted with dispensed polyurethane, for perfect insulation, sealing and vibration protection
• Electrical connections can be customer specific or standard JAEGER connectors. For NATO application the connectors are from SOURIAU or JUPITER
Weight
Usually 3.2 Kg/meter
Length
Up to 6 metres
Width
Usually 60x60mm, 30x30mm, 50x50mm
Other Dimensions
Up to 90mm x 90mm
Insulation
IP54 or 64
Other Features
• The pipes can be considered as mechanical parts offering the corresponding savings, allowing sensors with identical extension cord lengths
• Mounted with one bracket, approximately every 1.5 metres

Description

Your ability to perform is based on a need for absolute reliability.

Enclosed within aluminium profiles, using typical 60mm x 60mm extrusions, the CMR PIPEHarness™ protects your critical wiring on the engine platform and internally, within the crank case.

Typical applications of the Gas Engine Ignition PIPEHarness™ range includes:
• Transmission of power supply for ignition coils
• Connection of sensors used for monitoring gas and dual fuel engines
• Transmission of measuring signals

Main benefits include:
• Simplified engine cabling
• Reduced costs of cabling
• Installation and replacement of sensors in minimum time
• Impossibility of inversion when connecting sensor
• Standardization of sensors (cable length) and optimization of spare parts stocks.

Filename Download
BV Certificate Download

The information you provide will be used for the purpose of fulfilling your request of the CMR Group and our internal use only. We will not distribute your information outside of the CMR Group.

* required