Solutions solaires et hybrides

Nuclear Central Instrumentation

For more than 60 years CMR offers control and supervision solutions in the following sectors: energy, industry and marine. CMR uses its own intelligent sensors and automation systems.

CMR account nearly than 700 employees in 12 countries. The group offers tools for the areas of energy, industry and marine, by incorporating its own smart sensors.

CMR deploys a wide range of tools for its customers , from personalized service to creation of products. warrants that all of its services honor the latest regulations and other quality certifications.

Solutions solaires et hybrides

Advantages

CMR is oriented towards the sector of renewable energies. The objective is to provide solutions and reliable services to its users, by integrating digitization, now inevitable.

Aware of the impact of its domain of activity, CMR deploys processes to conserve The world of tomorrow.

For this purpose, the company implements a permanent line of conduct to all employees of the group, regardless their workplace.

Principle and operation

The fission of uranium atoms produces heat, which then transforms water into steam and sets in motion a turbine connected to an alternator which produces electricity.

1. The primary circuit
In the reactor, the fission of uranium atoms produces a large amount of heat. This heat increases the temperature of the water circulating around the reactor, to 320 ° C. The water is kept under pressure to keep it from boiling. This closed circuit is called the primary circuit.

2. The secondary circuit
The primary circuit communicates with a second closed circuit, called the secondary circuit, via a steam generator. In this steam generator, the hot water of the primary circuit heats the water of the secondary circuit which turns into steam. The pressure of this vapor turns a turbine which in turn drives an alternator. Thanks to the energy supplied by the turbine, the alternator produces an alternating electric current.

A transformer raises the voltage of the electric current produced by the alternator so that it can be more easily carried in very high voltage lines.

3. The cooling circuit
At the outlet of the turbine, the steam from the secondary circuit is again transformed into water thanks to a condenser in which circulates cold water from the sea or from a river. This third circuit is called the cooling circuit. On the banks of the river, the water in this 3rd circuit can then be cooled by contact with the air circulating in large towers, called air coolers.

The 3 water circuits are watertight with respect to each other.

Solutions solaires et hybrides

Nuclear Central Instrumentation: creation of intelligent hydroelectric solutions

Vision

Energy, industrial and marine players are studying actively renewable, low carbon sources of energy. Our will is to enable access to these renewable energies. How? 'Or' What ? By developing hybrid and microgrid solutions, which improve energy and storage efficiency.

Mission

We develop intelligent instrumentation and automation systems for a cleaner world in the sectors of energy, industry and marine. Since 1959, we assemble products innovative and personalized tools: intelligent sensors, monitoring systems efficient and automation. All these products are intended to energy, industry and the marine industry.

Values

Our values ​​ are those that guide our operations and improve our business. United, all employees who constitute our teams defend our values ​​ and work ardently to promote them.

In addition , we educate our collaborators about the consumption of energy resources and limit consumption of & # 039; water, energy or even paper (recycling, communications, ...).

Energy and education are the guidelines of CSR policy. CMR is committed to deploy its own environmental and social project activities. All employees are involved in this challenge CSR.

CMR analyzes every year its carbon footprint in order to reduce it. Actions to perfect the transport of raw materials and finished products are at the center of its concerns.

CMR analyzes the life cycle of its products as well as the composition of raw materials to improve waste recycling. The R & amp; D department concentrates its efforts on the integration of sustainable development at all levels of the company .

Solutions solaires et hybrides

Use case

Energy and education are the guidelines of CSR policy. CMR is committed to develop its own environmental and social project activities. All collaborators are involved in this challenge CSR.

CMR compares every year its carbon footprint in order to decrease it. Actions to increase the transport of raw materials and finished products are at the center of its concerns.

Solar

We produce and deliver turnkey solar or hybrid power plants for micro-grid, industrial or grid-connected installations.

La solution HYDROS designed by CMR makes it possible to hybridize diesel generator installations with solar production and also storage.

The transformation of thermal power plants into hybrid plants brings many benefits to the customers of these facilities:

  • »Significant reduction in use of fuels
  • »Strong decrease in CO2 emissions
  • »Gain in competitiveness on the tariff of the electricity produced
  • » decrease in maintenance costs .

Our HYLIOS solution is fundamentally dedicated for emerging countries strongly dependent on thermal production, but presenting significant solar potential.

The difficulty of hybrid thermal power plants consists in the dimensioning of the equipment of the thermal part, the storage, and in the piloting. The goal is to deliver a continuous supply of electricity to customers.

Our HYLIOS solution is equipped with an energy flow management and control system, making it possible to meet the consumption of energy needs. This solution is available for autonomous and nomadic mini-power plants but also for large hybrid ground installations.

Our energy management system offers many features for:

  • » optimize electrical efficiency
  • »Decrease the use of fuels
  • ' increase self-consumption

Offshore

We design low voltage electrical distribution boards, lifting and automation systems to global offshore oil and gas players. CMR product switchgear and energy management cabinets to international distributors of production, storage, loading platforms and floating supports (FPSO ships).

CMR is a global leader in the petroleum industry. We supply electrical systems for your drilling rigs, boats and wells.

Established on the Asian market, we manufacture electrical panels and distribution cabinets in collaboration with Siemens and Schneider Electric.

Using reliable and quality components, CMR meets all the requirements of the petroleum industry with complete control of costs and deadlines.

Nuclear

We are approved K3AD for the creation and installation of nuclear power plant measuring instruments.

Designed in accordance with nuclear regulations, our equipment operates under accidental circumstances and in accordance with the service life of nuclear power plants. 60 years of know-how. CMR is recognized as a major global player in the nuclear industry.

We assure an total quality of service to our customers: from engineering to qualification including mastery of the supply chain.

CMR certifies the management of the obsolescence of its products installed in more than 100 nuclear power plants since the 1980s.

We specialize in solutions for nuclear power plants and automation. Our customers regularly call on us for the supply, engineering, installation and maintenance of nuclear temperature sensors.

Industry

We distribute intelligent control systems to ensure secure operations. We support our clients in the areas of energy and industry.

CMR carries out your projects from the study, project management, testing, installation, programming, site management and commissioning.

We deliver efficient and advanced systems that incorporate the latest technology.

A global partner: we propose a local production thanks to support in our 12 operational sites around the world. A solution adapted to our international customers, with installations all diversified and requesting specific needs.

As an EPC, we provide exclusive service throughout the world: engineering, design, procurement, logistics, set-up and commissioning.

Engine & Propulsion

Our 60 years of engine experience allows us to standardize and maintain your electrical installations with proven stability of instrumentation.

We develop individual components and complete adequate solutions to the requirements of your engine instrumentation:

  • »Industrial motor sensors
  • »Cabling systems
  • »Alarm monitoring system

CMR offer absolute management of the life cycle of products to engine and generator manufacturers. This is made doable thanks to our engineers and an optimized supply chain. CMR is your partner from the design phase to commissioning.

We install and guarantee after-sales service for all your equipment anywhere in the world.

Hydro

COSTRONIC, a CMR Group subsidiary, puts all its experience in the field of automation and electrical engineering at the service of operators of hydroelectric power stations.

We collaborate for over 30 years with end buyers , major design offices and turbine manufacturers to offer turnkey solutions.

We supply all electrical products for hydroelectric power plants with tools adapted to the constraints and needs of operators.

Our control solutions guarantee maximum availability of installations and their daily production. They are based on recent technological innovations to increase your plant and its operation.

With more than 2,500 completed projects, we are recognized as developers of control tools in various sectors.

For more than 60 years, we have put our skills at the service of our customers.

References

Latest completed projects

HYDRO POWER PLANT

Hydro

Turnkey control and automation system for 3 Francis 8 MVA turbines, including energy evacuation (MV) and auxiliary services in Switzerland for FMMB

DATA CENTER

Solar & Hybrid

PV system (700 kWp) to hybrid existing diesel (4MVA) – from design to installation & commissioning in Lagos - Nigeria for 21st Century Technologies Ltd

POWER PLANT

Industry

Instrumentation and control system for 4 diesel engines of 12 MW each from conception to commissioning in Kaloum, Guinea, for AIS International

Let's discuss your project together.
I contact an advisor Solutions solaires et hybrides