Solutions solaires et hybrides

Hydraulic Energy Solution

For more than 60 years CMR develops control and supervision tools in the following fields : energy, industry and marine. CMR integrates its own intelligent sensors and automation systems.

CMR employs not less than 700 employees in 12 countries. The group deploys solutions for the sectors of energy, industry and marine, by using its own smart sensors.

CMR deploys a wide range of tools for its users, from individualized service to production of products. warrants that all of its services meet the latest regulations and other quality certifications.

Solutions solaires et hybrides

Advantages

CMR is directed towards the domain of renewable energies. The goal is to present tools and reliable services to its prospects , by coupling digitization, now inevitable.

Aware of the ecological role of its sector of activity, CMR deploys processes to conserve The world of tomorrow.

For this , the company proposes a permanent line of conduct to all employees of the group, whatever their location .

Principle and operation

The hydroelectric power station is a facility that produces electricity using the force of water. This is called hydraulic energy. The hydroelectric power station is made up of 3 main parts: the dam, the power station and the transformer.

The hydraulic dam is the key element in the operation of a hydroelectric power station. It is he who will command and direct the water in order to produce electricity. Constituted at the level of a river or a natural watercourse, it can take several names. The dam may be "over the water," indicating that it is not holding water. It can be "locked", in this case the water supply results from the rising tides. And finally, when it retains water, it is called a "retention dam". The latter is the most competitive, as it offers the opportunity to produce large amounts of electricity. It is built in strategic places to constitute a reservoir. The water stored in this lake will be poured into penstocks and led to the hydroelectric plant.

The hydroelectric power station is placed below the dam. The force of the falling water will thus activate the turbine, which will then operate the alternator. The latter will then produce an alternating current which will be sent to the electric transformer of the hydroelectric power station. The power of the hydropower plant is fundamentally derived from the force of the water. Thus, run-of-river dams, relying on sea currents, will create less electrical power than retention dams.

The transformer is the last key element in making hydroelectricity. This will amplify the voltage of the current that the alternator creates. This electricity will then be carried by the high and very high voltage lines.

The water that has been brought to the turbine is discharged to the river or stream through the tailrace channel.

Solutions solaires et hybrides

Hydraulic Energy Solution: creation of intelligent hydroelectric solutions

Vision

Energy, industrial and marine companies are researching actively renewable, low carbon sources of energy. Our wish is to support access to these renewable energies. How? 'Or' What ? By developing hybrid and microgrid solutions, which maximize energy and storage efficiency.

Mission

We compose intelligent instrumentation and automation systems for a cleaner world in the areas of energy, industry and marine. Since 1959, we create products innovative and also personalized tools: intelligent sensors, monitoring systems efficient and automation. All these products are reserved to energy, industry and the marine industry.

Values

Our values ​​ are those that drive our operations and advance our business. United, all collaborators who form our teams approve our values ​​ and work ardently to promote them.

In addition to this, we educate our employees about the consumption of energy resources and limit use of & # 039; water, energy or even paper (recycling, communications, ...).

Energy and education are the guidelines of CSR policy. CMR is committed to deploy its own environmental and social project activities. All collaborators are involved in this challenge CSR.

CMR compares every year its carbon footprint in order to decrease it. Actions to perfect the transport of raw materials and finished products are at the heart of its concerns.

CMR examines the life cycle of its products as well as the composition of raw materials to perfect waste recycling. The R & amp; D department concentrates its efforts on the integration of sustainable development at all levels of the company .

Solutions solaires et hybrides

Use case

Energy and education are the guidelines of CSR policy. CMR is committed to develop its own environmental and social project activities. All collaborators are committed in this challenge CSR.

CMR examines every year its carbon footprint in order to reduce it. Actions to perfect the transport of raw materials and finished products are at the center of its concerns.

Solar

We design and deliver turnkey solar or hybrid power plants for micro-grid, industrial or grid-connected installations.

La solution HYDROS designed by CMR makes it possible to hybridize diesel generator installations with solar production and possibly storage.

The rehabilitation of thermal power plants into hybrid plants provides many benefits to the customers of these facilities:

  • » major reduction in consumption of fuels
  • »Strong attenuation in CO2 emissions
  • »Gain in competitiveness on the price of the electricity produced
  • » decrease in maintenance costs .

Our HYLIOS solution is essentially dedicated for emerging countries strongly dependent on thermal production, but presenting significant solar potential.

The difficulty of hybrid thermal power plants consists in the dimensioning of the equipment of the thermal part, the storage, and in the piloting. The goal is to ensure a continuous supply of electricity to customers.

Our HYLIOS solution is equipped with an energy flow management and control system, making it possible to meet the use of energy needs. This solution is available for autonomous and nomadic mini-power plants but also for large hybrid ground installations.

Our energy management system offers many features for:

  • » optimize electrical efficiency
  • »Decrease the consumption of fuels
  • ' increase self-consumption

Offshore

We create low voltage electrical distribution boards, lifting and automation systems to international offshore oil and gas players. CMR delivers switchgear and energy management cabinets to international operators of production, storage, loading platforms and floating supports (FPSO ships).

CMR is a global player in the petroleum industry. We supply electrical systems for your drilling rigs, boats and wells.

Installed on the Asian market, we manufacture electrical panels and distribution cabinets in cooperation with Siemens and Schneider Electric.

Using efficient and quality components, CMR meets all the requirements of the petroleum industry with complete control of tariffs and deadlines.

Nuclear

We are confirmed K3AD for the manufacture and installation of nuclear power plant measuring instruments.

Created according to nuclear regulations, our equipment operates under accidental circumstances and in accordance with the service life of nuclear power plants. 60 years of know-how. CMR is recognized as a major global player in the nuclear industry.

We guarantee an total quality of service to our customers: from engineering to qualification including mastery of the supply chain.

CMR certifies the management of the obsolescence of its products installed in more than 100 nuclear power plants since the 1980s.

We specialize in solutions for nuclear power plants and automation. Our customers regularly call on us for the supply, engineering, installation and maintenance of nuclear temperature sensors.

Industry

We supply intelligent control systems to ensure secure operations. We support our clients in the areas of energy and industry.

CMR carries out your projects from the study, project management, testing, installation, programming, site management and commissioning.

We deliver efficient and sophisticated systems that incorporate the latest technology.

A global partner: we offer a local production thanks to support in our 12 operational sites around the world. A solution conformed to our international customers, with installations all diversified and requesting specific needs.

As an EPC, we deliver exclusive service throughout the world: engineering, design, procurement, logistics, set-up and commissioning.

Engine & Propulsion

Our 60 years of engine expertise allows us to simplify and maintain your electrical installations with proven reliability of instrumentation.

We create individual components and complete adjusted solutions to the obligations of your engine instrumentation:

  • »Industrial motor sensors
  • »Cabling systems
  • »Alarm monitoring system

CMR enables absolute management of the life cycle of products to engine and generator manufacturers. This is made doable thanks to our engineers and an optimized supply chain. CMR is your partner from the design phase to commissioning.

We install and ensure after-sales service for all your equipment anywhere in the world.

Hydro

COSTRONIC, a CMR Group subsidiary, puts all its expertise in the field of automation and electrical engineering at the service of operators of hydroelectric power stations.

We collaborate for over 30 years with end customers , major design offices and turbine manufacturers to offer turnkey solutions.

We supply all electrical products for hydroelectric power plants with tools adapted to the constraints and needs of operators.

Our control solutions guarantee maximum availability of installations and their daily production. They are based on recent technological innovations to increase your plant and its operation.

With more than 2,500 completed projects, we are recognized as developers of control tools in various areas .

For more than 60 years, we have put our skills at the service of our customers.

References

Latest completed projects

HYDRO POWER PLANT

Hydro

Turnkey control and automation system for 3 Francis 8 MVA turbines, including energy evacuation (MV) and auxiliary services in Switzerland for FMMB

DATA CENTER

Solar & Hybrid

PV system (700 kWp) to hybrid existing diesel (4MVA) – from design to installation & commissioning in Lagos - Nigeria for 21st Century Technologies Ltd

POWER PLANT

Industry

Instrumentation and control system for 4 diesel engines of 12 MW each from conception to commissioning in Kaloum, Guinea, for AIS International

Let's discuss your project together.
I contact an advisor Solutions solaires et hybrides