CMR employs nearly than 700 people in 12 countries. The group product solutions for the areas of energy, industry and marine, by using its own smart sensors.
CMR develops a wide range of solutions for its users, from personalized service to design of products. ensures that all of its services follow the recent regulations and other quality certifications.
CMR is directed towards the sector of renewable energies. The goal is to propose tools and reliable services to its buyers , by coupling digitization, today inevitable.
Aware of the impact of its sector of activity, CMR uses processes to protect The world of tomorrow.
For this , the company provides a daily line of conduct to all collaborators of the group, regardless their location .
The hydroelectric power station is a facility that creates electricity using the force of water. This is called hydraulic energy. The hydroelectric power station is made up of 3 main parts: the dam, the power station and the transformer.
The hydraulic dam is the key element in the operation of a hydroelectric power station. It is he who will command and direct the water in order to produce electricity. Established at the level of a river or a natural watercourse, it can take several names. The dam may be "over the water," indicating that it is not holding water. It can be "locked", in this case the water supply results from the rising tides. And finally, when it retains water, it is called a "retention dam". The latter is the most competitive, as it offers the opportunity to produce large amounts of electricity. It is built in strategic places to constitute a reservoir. The water stored in this lake will be poured into penstocks and led to the hydroelectric plant.
The hydroelectric power station is situated below the dam. The force of the falling water will thus activate the turbine, which will then operate the alternator. The latter will then produce an alternating current which will be sent to the electric transformer of the hydroelectric power station. The power of the hydropower plant is fundamentally derived from the force of the water. Thus, run-of-river dams, relying on sea currents, will create less electrical power than retention dams.
The transformer is the last key element in making hydroelectricity. This will amplify the voltage of the current that the alternator creates. This electricity will then be carried by the high and very high voltage lines.
The water that has been brought to the turbine is discharged to the river or stream through the tailrace channel.
Energy, industrial and marine players are studying actively renewable, low carbon sources of energy. Our wish is to support access to these renewable energies. How? 'Or' What ? By deploying hybrid and microgrid solutions, which maximize energy and storage efficiency.
We assemble intelligent instrumentation and automation systems for a cleaner world in the areas of energy, industry and marine. Since 1959, we compose services innovative as well as personalized tools: intelligent sensors, monitoring systems efficient and automation. All these products are reserved to energy, industry and the marine industry.
Our virtues are those that guide our operations and improve our business. United, all employees who form our teams support our virtues and work ardently to promote them.
In addition , we educate our collaborators about the consumption of energy resources and limit consumption of & # 039; water, energy or even paper (recycling, communications, ...).
Energy and education are the guidelines of CSR policy. CMR is committed to develop its own environmental and social project activities. All collaborators are involved in this challenge CSR.
CMR analyzes every year its carbon footprint in order to decrease it. Actions to increase the transport of raw materials and finished products are at the heart of its concerns.
CMR compares the life cycle of its products as well as the constitution of raw materials to perfect waste recycling. The R & amp; D department concentrates its efforts on the integration of sustainable development at all levels of society.
Energy and education are the guidelines of CSR policy. CMR is committed to develop its own environmental and social project activities. All employees are committed in this challenge CSR.
CMR compares every year its carbon footprint for decrease it. Actions to increase the transport of raw materials and finished products are at the center of its concerns.
We produce and deliver turnkey solar or hybrid power plants for micro-grid, industrial or grid-connected installations.
La solution
HYDROS deployed by CMR makes it possible to hybridize diesel generator installations with solar production and possibly storage.
The metamorphosis of thermal power plants into hybrid plants brings many benefits to the customers of these facilities:
Our HYLIOS solution is particularly reserved for emerging countries largely dependent on thermal production, but presenting significant solar potential.
The difficulty of hybrid thermal power plants consists in the dimensioning of the equipment of the thermal part, the storage, and in the piloting. The goal is to deliver a continuous supply of electricity to customers.
Our HYLIOS solution is equipped with an energy flow management and control system, making it possible to meet the use of energy needs. This solution is usable for autonomous and nomadic mini-power plants but also for large hybrid ground installations.
Our energy management system offers many features for:
We create low voltage electrical distribution boards, lifting and automation systems to global offshore oil and gas players. CMR supplies switchgear and energy management cabinets to international operators of production, storage, loading platforms and floating supports (FPSO ships).
CMR is a global leader in the petroleum industry. We supply electrical systems for your drilling rigs, boats and wells.
Established on the Asian market, we create electrical panels and distribution cabinets in cooperation with Siemens and Schneider Electric.
Using reliable and quality components, CMR meets all the obligations of the petroleum industry with total control of prices and deadlines.
We are validated K3AD for the design and installation of nuclear power plant measuring instruments.
Designed in accordance with nuclear regulations, our equipment operates under accidental circumstances and in accordance with the service life of nuclear power plants. 60 years of know-how. CMR is known as a major global player in the nuclear industry.
We assure an impeccable quality of service to our customers: from engineering to qualification including mastery of the supply chain.
CMR guarantees the management of the obsolescence of its products installed in more than 100 nuclear power plants since the 1980s.
We specialize in solutions for nuclear power plants and automation. Our customers regularly call on us for the supply, engineering, installation and maintenance of nuclear temperature sensors.
We deliver intelligent control systems to ensure secure operations. We support our clients in the sectors of energy and industry.
CMR carries out your projects from the study, project management, testing, installation, programming, site management and commissioning.
We produce efficient and sophisticated systems that understand the latest technology.
A global partner: we offer a local manufacture thanks to support in our 12 operational sites around the world. A solution conformed to our international customers, with installations all diversified and requesting specific needs.
As an EPC, we bring exclusive service throughout the world: engineering, design, procurement, logistics, set-up and commissioning.
Our 60 years of engine experience allows us help standardize and maintain your electrical installations with proven stability of instrumentation.
We develop individual components and successful tuned solutions to the obligations of your engine instrumentation:
CMR offer absolute management of the life cycle of products to engine and generator manufacturers. This is made possible thanks to our engineers and an perfected supply chain. CMR is your partner from the design phase to commissioning.
We install and guarantee after-sales service for all your equipment anywhere in the world.
COSTRONIC, a CMR Group subsidiary, puts all its experience in the field of automation and electrical engineering at the service of operators of hydroelectric power stations.
We cooperate for over 30 years with end customers , major design offices and turbine manufacturers to offer turnkey solutions.
We supply all electrical products for hydroelectric power plants with tools adapted to the constraints and needs of operators.
Our control solutions guarantee maximum availability of installations and their daily production. They are based on recent technological innovations to optimize your plant and its operation.
With more than 2,500 completed projects, we are recognized as developers of control tools in various sectors.
For more than 60 years, we have put our skills at the service of our customers.
Installation of a complete SCADA system package with a central monitoring system.
Designing, installing and commissioning a centralized SCADA system with addition of sensing elements.
Software replacement to improve data synchronization and redundancy.
