Solutions solaires et hybrides

Hydroelectric central installation

For more than 60 years CMR products control and supervision tools in the following sectors: energy, industry and marine. CMR uses its own intelligent sensors and automation systems.

CMR employs more than 700 employees in 12 countries. The group deploys tools for the areas of energy, industry and marine, by incorporating its own smart sensors.

CMR products a wide range of solutions for its buyers , from personalized service to tailoring of products. warrants that all of its services maintain the recent regulations and other quality certifications.

Solutions solaires et hybrides

Advantages

CMR is directed towards the domain of renewable energies. The objective is to propose tools and reliable services to its customers , by integrating digitization, now unavoidable .

Aware of the impact of its domain of activity, CMR proposes processes to conserve The world of tomorrow.

For this , the company provides a permanent line of conduct to all employees of the group, whatever their location .

Principle and operation

The hydroelectric power station is a facility that produces electricity using the force of water. This is called hydraulic energy. The hydroelectric power station is made up of 3 main parts: the dam, the power station and the transformer.

The hydraulic dam is the key element in the operation of a hydroelectric power station. It is he who will command and direct the water in order to produce electricity. Constituted at the level of a river or a natural watercourse, it can take several names. The dam may be "over the water," indicating that it is not holding water. It can be "locked", in this case the water supply results from the rising tides. And finally, when it retains water, it is called a "retention dam". The latter is the most competitive, as it offers the opportunity to produce large amounts of electricity. It is built in strategic places to constitute a reservoir. The water stored in this lake will be poured into penstocks and led to the hydroelectric plant.

The hydroelectric power station is located below the dam. The force of the falling water will thus activate the turbine, which will then operate the alternator. The latter will then produce an alternating current which will be sent to the electric transformer of the hydroelectric power station. The power of the hydropower plant is fundamentally derived from the force of the water. Thus, run-of-river dams, relying on sea currents, will create less electrical power than retention dams.

The transformer is the last key element in making hydroelectricity. This will amplify the voltage of the current that the alternator produces. This electricity will then be carried by the high and very high voltage lines.

The water that has been brought to the turbine is discharged to the river or stream through the tailrace channel.

Solutions solaires et hybrides

Hydroelectric central installation: development of intelligent hydroelectric solutions

Vision

Energy, industrial and marine players are studying intensively renewable, low carbon sources of energy. Our wish is to facilitate access to these renewable energies. How? 'Or' What ? By deploying hybrid and microgrid solutions, which maximize energy and storage efficiency.

Mission

We develop intelligent instrumentation and automation systems for a cleaner world in the sectors of energy, industry and marine. Since 1959, we compose services innovative and personalized tools: intelligent sensors, monitoring systems efficient and automation. All these services are reserved to energy, industry and the marine industry.

Values

Our values ​​ are those that drive our operations and advance our business. United, all collaborators who constitute our teams approve our virtues and work ardently to promote them.

In addition to this, we educate our collaborators about the use of energy resources and limit consumption of & # 039; water, energy or even paper (recycling, communications, ...).

Energy and education are the guidelines of CSR policy. CMR is committed to develop its own environmental and social project activities. All employees are involved in this challenge CSR.

CMR auscultates every year its carbon footprint in order to decrease it. Actions to increase the transport of raw materials and finished products are at the center of its concerns.

CMR compares the life cycle of its products as well as the constitution of raw materials to optimize waste recycling. The R & amp; D department concentrates its efforts on the integration of sustainable development at all levels of the company .

Solutions solaires et hybrides

Use case

Energy and education are the guidelines of CSR policy. CMR is committed to develop its own environmental and social project activities. All employees are involved in this challenge CSR.

CMR analyzes every year its carbon footprint in order to reduce it. Actions to increase the transport of raw materials and finished products are at the center of its concerns.

Solar

We design and deliver turnkey solar or hybrid power plants for micro-grid, industrial or grid-connected installations.

La solution HYDROS developed by CMR makes it possible to hybridize diesel generator installations with solar production and possibly storage.

The conversion of thermal power plants into hybrid plants delivers many benefits to the customers of these facilities:

  • » major reduction in use of fuels
  • »Strong decrease in CO2 emissions
  • »Gain in competitiveness on the price of the electricity produced
  • » decrease in maintenance costs .

Our HYLIOS solution is particularly dedicated for emerging countries largely dependent on thermal production, but unveiling significant solar potential.

The difficulty of hybrid thermal power plants resides in the dimensioning of the equipment of the thermal part, the storage, and in the piloting. The goal is to deliver a continuous supply of electricity to customers.

Our HYLIOS solution is equipped with an energy flow management and control system, making it possible to meet the use of energy needs. This solution is available for autonomous and nomadic mini-power plants but also for large hybrid ground installations.

Our energy management system offers many features for:

  • »Improve electrical efficiency
  • » reduce the consumption of fuels
  • ' increase self-consumption

Offshore

We design low voltage electrical distribution boards, lifting and automation systems to global offshore oil and gas players. CMR product switchgear and energy management cabinets to international distributors of production, storage, loading platforms and floating supports (FPSO ships).

CMR is a global leader in the petroleum industry. We offer electrical systems for your drilling rigs, boats and wells.

Established on the Asian market, we create electrical panels and distribution cabinets in collaboration with Siemens and Schneider Electric.

Using efficient and quality components, CMR meets all the obligations of the petroleum industry with total control of costs and deadlines.

Nuclear

We are confirmed K3AD for the creation and installation of nuclear power plant measuring instruments.

Created according to nuclear regulations, our equipment operates under accidental circumstances and in accordance with the service life of nuclear power plants. 60 years of know-how. CMR is known as a major global player in the nuclear industry.

We guarantee an irreproachable quality of service to our customers: from engineering to qualification including mastery of the supply chain.

CMR guarantees the management of the obsolescence of its products installed in more than 100 nuclear power plants since the 1980s.

We specialize in solutions for nuclear power plants and automation. Our customers regularly call on us for the supply, engineering, installation and maintenance of nuclear temperature sensors.

Industry

We supply intelligent control systems to ensure secure operations. We support our clients in the areas of energy and industry.

CMR concretizes your projects from the study, project management, testing, installation, programming, site management and commissioning.

We distribute efficient and sophisticated systems that incorporate the latest technology.

A global partner: we donate a local clothing thanks to support in our 12 operational sites around the world. A realization adapted to our international customers, with installations all diversified and requesting specific needs.

As an EPC, we deliver exclusive service throughout the world: engineering, design, procurement, logistics, set-up and commissioning.

Engine & Propulsion

Our 60 years of engine expertise allows us to simplify and maintain your electrical installations with proven stability of instrumentation.

We create individual components and complete tailored solutions to the requirements of your engine instrumentation:

  • »Industrial motor sensors
  • »Cabling systems
  • »Alarm monitoring system

CMR brings complete management of the life cycle of products to engine and generator manufacturers. This is made easy thanks to our engineers and an perfected supply chain. CMR is your partner from the design phase to commissioning.

We install and guarantee after-sales service for all your equipment anywhere in the world.

Hydro

COSTRONIC, a CMR Group subsidiary, puts all its experience in the field of automation and electrical engineering at the service of operators of hydroelectric power stations.

We cooperate for over 30 years with end buyers , major design offices and turbine manufacturers to offer turnkey solutions.

We supply all electrical products for hydroelectric power plants with tools adapted to the constraints and needs of operators.

Our control solutions guarantee maximum availability of installations and their daily production. They are based on recent technological innovations to maximize your plant and its operation.

With more than 2,500 completed projects, we are recognized as developers of control tools in various sectors.

For more than 60 years, we have put our skills at the service of our customers.

References

Latest completed projects

Engineering & Key Account Management

Engineering & Key Account Management

Our goal is to drive growth by supporting customers with our solutions to build long-term relationships aligned with our Key Account Management strategy.

Nuclear Monitoring Unit

Nuclear Monitoring Unit

S128NG Monitoring Unit dedicated for all Emergency Diesel Generators (EDG) installed on the French nuclear fleet.

Offshore patrol vessel

Offshore patrol vessel

Integrated control and command platform & cyber security, turnkey system delivered from studies to commissioning.

Let's discuss your project together.
I contact an advisor Solutions solaires et hybrides