CMR account more than 700 people in 12 countries. The group product tools for the sectors of energy, industry and marine, by incorporating its own smart sensors.
CMR products a wide range of tools for its prospects , from personalized service to design of products. warrants that all of its services meet the latest regulations and other quality certifications.
CMR is directed towards the domain of renewable energies. The objective is to submit tools and efficient services to its prospects , by proposing digitization, now unavoidable .
Aware of the impact of its sector of activity, CMR develops processes to conserve The world of tomorrow.
For this purpose, the company proposes a permanent line of conduct to all employees of the group, whatever their location .
The hydroelectric power station is a installation that produces electricity using the force of water. This is called hydraulic energy. The hydroelectric power station is made up of 3 main parts: the dam, the power station and the transformer.
The hydraulic dam is the key element in the operation of a hydroelectric power station. It is he who will command and direct the water in order to create electricity. Constituted at the level of a river or a natural watercourse, it can take several names. The dam may be "over the water," indicating that it is not holding water. It can be "locked", in this case the water supply results from the rising tides. And finally, when it retains water, it is called a "retention dam". The latter is the most competitive, as it offers the opportunity to produce large amounts of electricity. It is built in strategic places to constitute a reservoir. The water stored in this lake will be poured into penstocks and led to the hydroelectric plant.
The hydroelectric power station is placed below the dam. The force of the falling water will thus activate the turbine, which will then operate the alternator. The latter will then create an alternating current which will be sent to the electric transformer of the hydroelectric power station. The power of the hydropower plant is fundamentally derived from the force of the water. Thus, run-of-river dams, relying on sea currents, will produce less electrical power than retention dams.
The transformer is the last key element in making hydroelectricity. This will amplify the voltage of the current that the alternator produces. This electricity will then be carried by the high and very high voltage lines.
The water that has been brought to the turbine is discharged to the river or stream through the tailrace channel.
Energy, industrial and marine players are researching actively renewable, low carbon sources of energy. Our desire is to promote access to these renewable energies. How? 'Or' What ? By developing hybrid and microgrid solutions, which maximize energy and storage efficiency.
We compose intelligent instrumentation and automation systems for a cleaner world in the sectors of energy, industry and marine. Since 1959, we assemble services innovative and also tailor-made tools: intelligent sensors, monitoring systems efficient and automation. All these products are dedicated to energy, industry and the marine industry.
Our values are those that drive our operations and advance our business. United, all employees who constitute our teams support our values and work ardently to promote them.
In addition to this, we educate our collaborators about the consumption of energy resources and limit use of & # 039; water, energy or even paper (recycling, communications, ...).
Energy and education are the guidelines of CSR policy. CMR is committed to develop its own environmental and social project activities. All employees are committed in this challenge CSR.
CMR analyzes every year its carbon footprint for reduce it. Actions to improve the transport of raw materials and finished products are at the center of its concerns.
CMR analyzes the life cycle of its products as well as the constitution of raw materials to perfect waste recycling. The R & amp; D department centralizes its efforts on the integration of sustainable development at all levels of society.
Energy and education are the guidelines of CSR policy. CMR is committed to develop its own environmental and social project activities. All employees are committed in this challenge CSR.
CMR analyzes every year its carbon footprint in order to reduce it. Actions to perfect the transport of raw materials and finished products are at the heart of its concerns.
We design and deliver turnkey solar or hybrid power plants for micro-grid, industrial or grid-connected installations.
La solution
HYDROS developed by CMR makes it possible to hybridize diesel generator installations with solar production and possibly storage.
The conversion of thermal power plants into hybrid plants brings many benefits to the customers of these facilities:
Our HYLIOS solution is fundamentally reserved for emerging countries largely dependent on thermal production, but presenting significant solar potential.
The complexity of hybrid thermal power plants resides in the dimensioning of the equipment of the thermal part, the storage, and in the piloting. The goal is to to ensure a continuous supply of electricity to customers.
Our HYLIOS solution is equipped with an energy flow management and control system, making it possible to meet the use of energy needs. This solution is available for autonomous and nomadic mini-power plants but also for large hybrid ground installations.
Our energy management system offers many features for:
We design low voltage electrical distribution boards, lifting and automation systems to international offshore oil and gas players. CMR delivers switchgear and energy management cabinets to international operators of production, storage, loading platforms and floating supports (FPSO ships).
CMR is a global leader in the petroleum industry. We supply electrical systems for your drilling rigs, boats and wells.
Installed on the Asian market, we create electrical panels and distribution cabinets in cooperation with Siemens and Schneider Electric.
Using reliable and quality components, CMR meets all the requirements of the petroleum industry with total control of tariffs and deadlines.
We are confirmed K3AD for the manufacture and installation of nuclear power plant measuring instruments.
Created in accordance with nuclear regulations, our equipment operates under accidental circumstances and in accordance with the service life of nuclear power plants. 60 years of know-how. CMR is recognized as a major global player in the nuclear industry.
We assure an irreproachable quality of service to our customers: from engineering to qualification including mastery of the supply chain.
CMR certifies the management of the obsolescence of its products installed in more than 100 nuclear power plants since the 1980s.
We specialize in solutions for nuclear power plants and automation. Our customers regularly call on us for the supply, engineering, installation and maintenance of nuclear temperature sensors.
We distribute intelligent control systems to maintain secure operations. We support our clients in the areas of energy and industry.
CMR concretizes your projects from the study, project management, testing, installation, programming, site management and commissioning.
We produce efficient and sophisticated systems that integrate the latest technology.
A global partner: we propose a local manufacture thanks to support in our 12 operational sites around the world. A realization adjusted to our international customers, with installations all varied and requesting specific needs.
As an EPC, we deliver exclusive service throughout the world: engineering, design, procurement, logistics, set-up and commissioning.
Our 60 years of engine experience allows us to standardize and maintain your electrical installations with proven reliability of instrumentation.
We develop individual components and successful tailored solutions to the obligations of your engine instrumentation:
CMR enables absolute management of the life cycle of products to engine and generator manufacturers. This is made doable thanks to our engineers and an improved supply chain. CMR is your partner from the design phase to commissioning.
We install and ensure after-sales service for all your equipment anywhere in the world.
COSTRONIC, a CMR Group subsidiary, puts all its expertise in the field of automation and electrical engineering at the service of operators of hydroelectric power stations.
We collaborate for over 30 years with end users, major design offices and turbine manufacturers to provide turnkey solutions.
We supply all electrical products for hydroelectric power plants with tools adapted to the constraints and needs of operators.
Our control solutions guarantee maximum availability of installations and their daily production. They are based on recent technological innovations to improve your plant and its operation.
With more than 2,500 completed projects, we are recognized as developers of control tools in various sectors.
For more than 60 years, we have put our skills at the service of our customers.
Installation of a complete SCADA system package with a central monitoring system.
Designing, installing and commissioning a centralized SCADA system with addition of sensing elements.
Software replacement to improve data synchronization and redundancy.
