CMR account nearly than 700 people in 12 countries. The group develops tools for the sectors of energy, industry and marine, by integrating its own smart sensors.
CMR products a wide range of solutions for its users, from individualized service to tailoring of products. ensures that all of its services follow the recent regulations and other quality certifications.
CMR is oriented towards the domain of renewable energies. The objective is to propose tools and efficient services to its buyers , by integrating digitization, today unavoidable .
Aware of the ecological role of its domain of activity, CMR develops processes to conserve The world of tomorrow.
For this purpose, the company proposes a daily line of conduct to all employees of the group, whatever their location .
The hydroelectric power station is a facility that produces electricity using the force of water. This is called hydraulic energy. The hydroelectric power station is made up of 3 main parts: the dam, the power station and the transformer.
The hydraulic dam is the key element in the operation of a hydroelectric power station. It is he who will command and direct the water in order to create electricity. Settled at the level of a river or a natural watercourse, it can take several names. The dam may be "over the water," indicating that it is not holding water. It can be "locked", in this case the water supply results from the rising tides. And finally, when it retains water, it is called a "retention dam". The latter is the most competitive, as it offers the opportunity to produce large amounts of electricity. It is built in strategic places to constitute a reservoir. The water stored in this lake will be poured into penstocks and led to the hydroelectric plant.
The hydroelectric power station is settled below the dam. The force of the falling water will thus activate the turbine, which will then operate the alternator. The latter will then create an alternating current which will be sent to the electric transformer of the hydroelectric power station. The power of the hydropower plant is fundamentally derived from the force of the water. Thus, run-of-river dams, relying on sea currents, will create less electrical power than retention dams.
The transformer is the last key element in making hydroelectricity. This will amplify the voltage of the current that the alternator produces. This electricity will then be carried by the high and very high voltage lines.
The water that has been brought to the turbine is discharged to the river or stream through the tailrace channel.
Energy, industrial and marine companies are studying intensively renewable, low carbon sources of energy. Our desire is to enable access to these renewable energies. How? 'Or' What ? By shaping hybrid and microgrid solutions, which optimize energy and storage efficiency.
We assemble intelligent instrumentation and automation systems for a cleaner world in the sectors of energy, industry and marine. Since 1959, we develop services innovative and tailor-made tools: intelligent sensors, monitoring systems efficient and automation. All these products are dedicated to energy, industry and the marine industry.
Our values are those that drive our operations and advance our business. United, all employees who form our teams consolidate our virtues and work ardently to promote them.
In addition , we educate our collaborators about the use of energy resources and limit use of & # 039; water, energy or even paper (recycling, communications, ...).
Energy and education are the guidelines of CSR policy. CMR is committed to develop its own environmental and social project activities. All employees are involved in this challenge CSR.
CMR compares every year its carbon footprint in order to decrease it. Actions to perfect the transport of raw materials and finished products are at the heart of its concerns.
CMR compares the life cycle of its products as well as the constitution of raw materials to increase waste recycling. The R & amp; D department concentrates its efforts on the integration of sustainable development at all levels of society.
Energy and education are the guidelines of CSR policy. CMR is committed to develop its own environmental and social project activities. All employees are involved in this challenge CSR.
CMR compares every year its carbon footprint in order to reduce it. Actions to perfect the transport of raw materials and finished products are at the heart of its concerns.
We realize and deliver turnkey solar or hybrid power plants for micro-grid, industrial or grid-connected installations.
La solution
HYDROS deployed by CMR makes it possible to hybridize diesel generator installations with solar production and possibly storage.
The metamorphosis of thermal power plants into hybrid plants gives many benefits to the customers of these facilities:
Our HYLIOS solution is particularly dedicated for emerging countries strongly dependent on thermal production, but unveiling significant solar potential.
The difficulty of hybrid thermal power plants consists in the dimensioning of the equipment of the thermal part, the storage, and in the piloting. The goal is to to ensure a continuous supply of electricity to customers.
Our HYLIOS solution is equipped with an energy flow management and control system, making it possible to meet the use of energy needs. This solution is available for autonomous and nomadic mini-power plants but also for large hybrid ground installations.
Our energy management system offers many features for:
We create low voltage electrical distribution boards, lifting and automation systems to global offshore oil and gas players. CMR product switchgear and energy management cabinets to international operators of production, storage, loading platforms and floating supports (FPSO ships).
CMR is a global player in the petroleum industry. We supply electrical systems for your drilling rigs, ships and wells.
Installed on the Asian market, we create electrical panels and distribution cabinets in collaboration with Siemens and Schneider Electric.
Using reliable and quality components, CMR meets all the requirements of the petroleum industry with complete control of tariffs and deadlines.
We are confirmed K3AD for the creation and installation of nuclear power plant measuring instruments.
Designed in accordance with nuclear regulations, our equipment operates under accidental circumstances and in accordance with the service life of nuclear power plants. 60 years of know-how. CMR is known as a major global player in the nuclear industry.
We certify an total quality of service to our customers: from engineering to qualification including mastery of the supply chain.
CMR guarantees the management of the obsolescence of its products installed in more than 100 nuclear power plants since the 1980s.
We specialize in solutions for nuclear power plants and automation. Our customers regularly call on us for the supply, engineering, installation and maintenance of nuclear temperature sensors.
We supply intelligent control systems to ensure secure operations. We support our clients in the areas of energy and industry.
CMR carries out your projects from the study, project management, testing, installation, programming, site management and commissioning.
We distribute reliable and advanced systems that incorporate the latest technology.
A global partner: we donate a local realization thanks to support in our 12 operational sites around the world. A realization adapted to our international customers, with installations all diversified and requesting specific needs.
As an EPC, we bring exclusive service throughout the world: engineering, design, procurement, logistics, set-up and commissioning.
Our 60 years of engine experience allows us help standardize and maintain your electrical installations with proven stability of instrumentation.
We develop individual components and successful adjusted solutions to the requirements of your engine instrumentation:
CMR offer absolute management of the life cycle of products to engine and generator manufacturers. This is made easy thanks to our engineers and an perfected supply chain. CMR is your partner from the design phase to commissioning.
We install and guarantee after-sales service for all your equipment anywhere in the world.
COSTRONIC, a CMR Group subsidiary, puts all its experience in the field of automation and electrical engineering at the service of operators of hydroelectric power stations.
We collaborate for over 30 years with end users, major design offices and turbine manufacturers to offer turnkey solutions.
We supply all electrical products for hydroelectric power plants with tools adapted to the constraints and needs of operators.
Our control solutions guarantee maximum availability of installations and their daily production. They are based on recent technological innovations to increase your plant and its operation.
With more than 2,500 completed projects, we are recognized as developers of control tools in various sectors.
For more than 60 years, we have put our skills at the service of our customers.
Installation of a complete SCADA system package with a central monitoring system.
Designing, installing and commissioning a centralized SCADA system with addition of sensing elements.
Software replacement to improve data synchronization and redundancy.
