Solutions solaires et hybrides

Hydroelectric power plant solution

For more than 60 years CMR offers control and supervision solutions in the following sectors: energy, industry and marine. CMR uses its own intelligent sensors and automation systems.

CMR account not less than 700 people in 12 countries. The group product tools for the sectors of energy, industry and marine, by using its own smart sensors.

CMR deploys a wide range of solutions for its prospects , from personalized service to production of products. warrants that all of its services meet the recent regulations and other quality certifications.

Solutions solaires et hybrides

Advantages

CMR is oriented towards the sector of renewable energies. The objective is to provide tools and reliable services to its buyers , by integrating digitization, now unavoidable .

Aware of importance of its sector of activity, CMR develops processes to protect The world of tomorrow.

For this purpose, the company proposes a permanent line of conduct to all employees of the group, whatever their workplace.

Principle and operation

The hydroelectric power station is a installation that creates electricity using the force of water. This is called hydraulic energy. The hydroelectric power station is made up of 3 main parts: the dam, the power station and the transformer.

The hydraulic dam is the key element in the operation of a hydroelectric power station. It is he who will command and direct the water in order to create electricity. Established at the level of a river or a natural watercourse, it can take several names. The dam may be "over the water," indicating that it is not holding water. It can be "locked", in this case the water supply results from the rising tides. And finally, when it retains water, it is called a "retention dam". The latter is the most competitive, as it offers the opportunity to produce large amounts of electricity. It is built in strategic places to constitute a reservoir. The water stored in this lake will be poured into penstocks and led to the hydroelectric plant.

The hydroelectric power station is located below the dam. The force of the falling water will thus activate the turbine, which will then operate the alternator. The latter will then produce an alternating current which will be sent to the electric transformer of the hydroelectric power station. The power of the hydropower plant is fundamentally derived from the force of the water. Thus, run-of-river dams, relying on sea currents, will create less electrical power than retention dams.

The transformer is the last key element in making hydroelectricity. This will amplify the voltage of the current that the alternator creates. This electricity will then be carried by the high and very high voltage lines.

The water that has been brought to the turbine is discharged to the river or stream through the tailrace channel.

Solutions solaires et hybrides

Hydroelectric power plant solution: development of intelligent hydroelectric solutions

Vision

Energy, industrial and marine companies are researching actively renewable, low carbon sources of energy. Our will is to support access to these renewable energies. How? 'Or' What ? By developing hybrid and microgrid solutions, which optimize energy and storage efficiency.

Mission

We create intelligent instrumentation and automation systems for a cleaner world in the areas of energy, industry and marine. Since 1959, we assemble services innovative as well as tailor-made tools: intelligent sensors, monitoring systems advanced and automation. All these products are dedicated to energy, industry and the marine industry.

Values

Our virtues are those that direct our operations and improve our business. United, all employees who form our teams support our values ​​ and work ardently to promote them.

In addition to this, we educate our employees about the use of energy resources and limit consumption of & # 039; water, energy or even paper (recycling, communications, ...).

Energy and education are the guidelines of CSR policy. CMR is committed to develop its own environmental and social project activities. All employees are committed in this challenge CSR.

CMR examines every year its carbon footprint in order to decrease it. Actions to improve the transport of raw materials and finished products are at the center of its concerns.

CMR analyzes the life cycle of its products as well as the constitution of raw materials to perfect waste recycling. The R & amp; D department centralizes its efforts on the integration of sustainable development at all levels of the company .

Solutions solaires et hybrides

Use case

Energy and education are the guidelines of CSR policy. CMR is committed to develop its own environmental and social project activities. All collaborators are involved in this challenge CSR.

CMR auscultates every year its carbon footprint in order to reduce it. Actions to increase the transport of raw materials and finished products are at the heart of its concerns.

Solar

We design and deliver turnkey solar or hybrid power plants for micro-grid, industrial or grid-connected installations.

La solution HYDROS designed by CMR makes it possible to hybridize diesel generator installations with solar production and possibly storage.

The transformation of thermal power plants into hybrid plants brings many benefits to the customers of these facilities:

  • » major reduction in use of fuels
  • »Strong decrease in CO2 emissions
  • »Gain in competitiveness on the price of the electricity produced
  • »Decrease in maintenance tariffs.

Our HYLIOS solution is mainly dedicated for emerging countries strongly dependent on thermal production, but unveiling significant solar potential.

The complexity of hybrid thermal power plants resides in the dimensioning of the equipment of the thermal part, the storage, and in the piloting. The goal is to ensure a continuous supply of electricity to customers.

Our HYLIOS solution is equipped with an energy flow management and control system, making it possible to meet the use of energy needs. This solution is accessible for autonomous and nomadic mini-power plants but also for large hybrid ground installations.

Our energy management system offers many features for:

  • »Improve electrical efficiency
  • »Decrease the use of fuels
  • ' maximize self-consumption

Offshore

We design low voltage electrical distribution boards, lifting and automation systems to international offshore oil and gas players. CMR supplies switchgear and energy management cabinets to international distributors of production, storage, loading platforms and floating supports (FPSO ships).

CMR is a global player in the petroleum industry. We offer electrical systems for your drilling rigs, ships and wells.

Present on the Asian market, we develop electrical panels and distribution cabinets in cooperation with Siemens and Schneider Electric.

Using efficient and quality components, CMR meets all the obligations of the petroleum industry with total control of tariffs and deadlines.

Nuclear

We are approved K3AD for the creation and installation of nuclear power plant measuring instruments.

Designed according to nuclear regulations, our equipment operates under accidental circumstances and in accordance with the service life of nuclear power plants. 60 years of know-how. CMR is recognized as a major global player in the nuclear industry.

We assure an impeccable quality of service to our customers: from engineering to qualification including mastery of the supply chain.

CMR guarantees the management of the obsolescence of its products installed in more than 100 nuclear power plants since the 1980s.

We specialize in solutions for nuclear power plants and automation. Our customers regularly call on us for the supply, engineering, installation and maintenance of nuclear temperature sensors.

Industry

We bring intelligent control systems to ensure secure operations. We support our clients in the areas of energy and industry.

CMR concretizes your projects from the study, project management, testing, installation, programming, site management and commissioning.

We deliver efficient and advanced systems that unite the latest technology.

A global partner: we donate a local clothing thanks to support in our 12 operational sites around the world. A solution adjusted to our international customers, with installations all varied and requesting specific needs.

As an EPC, we provide unique service throughout the world: engineering, design, procurement, logistics, set-up and commissioning.

Engine & Propulsion

Our 60 years of engine experience allows us help simplify and maintain your electrical installations with proven reliability of instrumentation.

We develop individual components and successful tailored solutions to the requirements of your engine instrumentation:

  • »Industrial motor sensors
  • »Cabling systems
  • »Alarm monitoring system

CMR enables total management of the life cycle of products to engine and generator manufacturers. This is made possible thanks to our engineers and an perfected supply chain. CMR is your partner from the design phase to commissioning.

We install and ensure after-sales service for all your equipment anywhere in the world.

Hydro

COSTRONIC, a CMR Group subsidiary, puts all its experience in the field of automation and electrical engineering at the service of operators of hydroelectric power stations.

We collaborate for over 30 years with end customers , major design offices and turbine manufacturers to offer turnkey solutions.

We supply all electrical products for hydroelectric power plants with tools adapted to the constraints and needs of operators.

Our control solutions guarantee maximum availability of installations and their daily production. They are based on recent technological innovations to optimize your plant and its operation.

With more than 2,500 completed projects, we are recognized as developers of control tools in various areas .

For more than 60 years, we have put our skills at the service of our customers.

References

Latest completed projects

OFFSHORE CONSTRUCTION

OFFSHORE CONSTRUCTION

Installation of a complete SCADA system package with a central monitoring system.

SCADA SYSTEM

SCADA SYSTEM

Designing, installing and commissioning a centralized SCADA system with addition of sensing elements.

OFFSHORE TECHNOLOGY DEVELOPMENT

OFFSHORE TECHNOLOGY DEVELOPMENT

Software replacement to improve data synchronization and redundancy.

Let's discuss your project together.
I contact an advisor Solutions solaires et hybrides