CMR account more than 700 people in 12 countries. The group product solutions for the areas of energy, industry and marine, by using its own smart sensors.
CMR products a wide range of tools for its users, from personalized service to design of products. warrants that all of its services honor the latest regulations and other quality certifications.
CMR is directed towards the sector of renewable energies. The objective is to provide tools and reliable services to its customers , by adding digitization, now unavoidable .
Aware of the impact of its sector of activity, CMR implements processes to respect The world of tomorrow.
For this , the company implements a daily line of conduct to all employees of the group, regardless their location .
The hydroelectric power station is a facility that creates electricity using the force of water. This is called hydraulic energy. The hydroelectric power station is made up of 3 main parts: the dam, the power station and the transformer.
The hydraulic dam is the key element in the operation of a hydroelectric power station. It is he who will command and direct the water in order to produce electricity. Established at the level of a river or a natural watercourse, it can take several names. The dam may be "over the water," indicating that it is not holding water. It can be "locked", in this case the water supply results from the rising tides. And finally, when it retains water, it is called a "retention dam". The latter is the most competitive, as it offers the opportunity to produce large amounts of electricity. It is built in strategic places to constitute a reservoir. The water stored in this lake will be poured into penstocks and led to the hydroelectric plant.
The hydroelectric power station is located below the dam. The force of the falling water will thus activate the turbine, which will then operate the alternator. The latter will then produce an alternating current which will be sent to the electric transformer of the hydroelectric power station. The power of the hydropower plant is fundamentally derived from the force of the water. Thus, run-of-river dams, relying on sea currents, will create less electrical power than retention dams.
The transformer is the last key element in making hydroelectricity. This will amplify the voltage of the current that the alternator produces. This electricity will then be carried by the high and very high voltage lines.
The water that has been brought to the turbine is discharged to the river or stream through the tailrace channel.
Energy, industrial and marine players are researching actively renewable, low carbon sources of energy. Our will is to enable access to these renewable energies. How? 'Or' What ? By advancing hybrid and microgrid solutions, which improve energy and storage efficiency.
We assemble intelligent instrumentation and automation systems for a cleaner world in the areas of energy, industry and marine. Since 1959, we design products innovative and also tailor-made tools: intelligent sensors, monitoring systems advanced and automation. All these services are dedicated to energy, industry and the marine industry.
Our values are those that guide our operations and advance our business. United, all employees who form our teams defend our values and work ardently to promote them.
In addition , we educate our employees about the consumption of energy resources and limit use of & # 039; water, energy or even paper (recycling, communications, ...).
Energy and education are the guidelines of CSR policy. CMR is committed to develop its own environmental and social project activities. All employees are committed in this challenge CSR.
CMR compares every year its carbon footprint in order to decrease it. Actions to perfect the transport of raw materials and finished products are at the heart of its concerns.
CMR analyzes the life cycle of its products as well as the composition of raw materials to perfect waste recycling. The R & amp; D department centralizes its efforts on the integration of sustainable development at all levels of the company .
Energy and education are the guidelines of CSR policy. CMR is committed to develop its own environmental and social project activities. All employees are involved in this challenge CSR.
CMR compares every year its carbon footprint in order to decrease it. Actions to perfect the transport of raw materials and finished products are at the heart of its concerns.
We create and deliver turnkey solar or hybrid power plants for micro-grid, industrial or grid-connected installations.
La solution
HYDROS developed by CMR makes it possible to hybridize diesel generator installations with solar production and possibly storage.
The rehabilitation of thermal power plants into hybrid plants brings many benefits to the customers of these facilities:
Our HYLIOS solution is particularly intended for emerging countries strongly dependent on thermal production, but presenting significant solar potential.
The difficulty of hybrid thermal power plants resides in the dimensioning of the equipment of the thermal part, the storage, and in the piloting. The goal is to ensure a continuous supply of electricity to customers.
Our HYLIOS solution is equipped with an energy flow management and control system, making it possible to meet the use of energy needs. This solution is accessible for autonomous and nomadic mini-power plants but also for large hybrid ground installations.
Our energy management system offers many features for:
We create low voltage electrical distribution boards, lifting and automation systems to global offshore oil and gas players. CMR product switchgear and energy management cabinets to international distributors of production, storage, loading platforms and floating supports (FPSO ships).
CMR is a global player in the petroleum industry. We supply electrical systems for your drilling rigs, ships and wells.
Present on the Asian market, we develop electrical panels and distribution cabinets in cooperation with Siemens and Schneider Electric.
Using efficient and quality components, CMR meets all the obligations of the petroleum industry with complete control of tariffs and deadlines.
We are validated K3AD for the creation and installation of nuclear power plant measuring instruments.
Designed in accordance with nuclear regulations, our equipment operates under accidental circumstances and in accordance with the service life of nuclear power plants. 60 years of know-how. CMR is recognized as a major global player in the nuclear industry.
We certify an irreproachable quality of service to our customers: from engineering to qualification including mastery of the supply chain.
CMR guarantees the management of the obsolescence of its products installed in more than 100 nuclear power plants since the 1980s.
We specialize in solutions for nuclear power plants and automation. Our customers regularly call on us for the supply, engineering, installation and maintenance of nuclear temperature sensors.
We bring intelligent control systems to ensure secure operations. We support our clients in the areas of energy and industry.
CMR carries out your projects from the study, project management, testing, installation, programming, site management and commissioning.
We distribute efficient and sophisticated systems that incorporate the latest technology.
A global partner: we donate a local clothing thanks to support in our 12 operational sites around the world. A solution conformed to our international customers, with installations all diversified and requesting specific needs.
As an EPC, we provide exclusive service throughout the world: engineering, design, procurement, logistics, set-up and commissioning.
Our 60 years of engine experience allows us help conform and maintain your electrical installations with proven reliability of instrumentation.
We design individual components and complete tuned solutions to the obligations of your engine instrumentation:
CMR offer complete management of the life cycle of products to engine and generator manufacturers. This is made doable thanks to our engineers and an perfected supply chain. CMR is your partner from the design phase to commissioning.
We install and guarantee after-sales service for all your equipment anywhere in the world.
COSTRONIC, a CMR Group subsidiary, puts all its expertise in the field of automation and electrical engineering at the service of operators of hydroelectric power stations.
We collaborate for over 30 years with end users, major design offices and turbine manufacturers to offer turnkey solutions.
We supply all electrical products for hydroelectric power plants with tools adapted to the constraints and needs of operators.
Our control solutions guarantee maximum availability of installations and their daily production. They are based on recent technological innovations to increase your plant and its operation.
With more than 2,500 completed projects, we are recognized as developers of control tools in various areas .
For more than 60 years, we have put our skills at the service of our customers.
Installation of a complete SCADA system package with a central monitoring system.
Designing, installing and commissioning a centralized SCADA system with addition of sensing elements.
Software replacement to improve data synchronization and redundancy.
