CMR employs more than 700 employees in 12 countries. The group product tools for the areas of energy, industry and marine, by integrating its own smart sensors.
CMR deploys a wide range of tools for its customers , from personalized service to creation of products. warrants that all of its services maintain the latest regulations and other quality certifications.
CMR is directed towards the sector of renewable energies. The objective is to propose tools and efficient services to its customers , by coupling digitization, today unavoidable .
Aware of the ecological role of its domain of activity, CMR develops processes to protect The world of tomorrow.
For this , the company implements a permanent line of conduct to all employees of the group, regardless their workplace.
The fission of uranium atoms produces heat, which then transforms water into steam and sets in motion a turbine connected to an alternator which produces electricity.
1. The primary circuit
In the reactor, the fission of uranium atoms produces a large amount of heat.
This heat increases the temperature of the water circulating around the reactor, to 320 ° C. The water is kept under pressure to keep it from boiling. This closed circuit is called the primary circuit.
2. The secondary circuit
The primary circuit communicates with a second closed circuit, called the secondary circuit, via a steam generator. In this steam generator, the hot water of the primary circuit heats the water of the secondary circuit which turns into steam. The pressure of this vapor turns a turbine which in turn drives an alternator. Thanks to the energy supplied by the turbine, the alternator produces an alternating electric current.
A transformer raises the voltage of the electric current produced by the alternator so that it can be more easily carried in very high voltage lines.
3. The cooling circuit
At the outlet of the turbine, the steam from the secondary circuit is again transformed into water thanks to a condenser in which circulates cold water from the sea or from a river. This third circuit is called the cooling circuit.
On the banks of the river, the water in this 3rd circuit can then be cooled by contact with the air circulating in large towers, called air coolers.
The 3 water circuits are watertight with respect to each other.
Energy, industrial and marine players are studying actively renewable, low carbon sources of energy. Our wish is to support access to these renewable energies. How? 'Or' What ? By developing hybrid and microgrid solutions, which maximize energy and storage efficiency.
We develop intelligent instrumentation and automation systems for a cleaner world in the areas of energy, industry and marine. Since 1959, we develop services innovative as well as personalized tools: intelligent sensors, monitoring systems efficient and automation. All these services are reserved to energy, industry and the marine industry.
Our virtues are those that drive our operations and improve our business. United, all employees who constitute our teams consolidate our values and work ardently to promote them.
In addition , we educate our collaborators about the consumption of energy resources and limit use of & # 039; water, energy or even paper (recycling, communications, ...).
Energy and education are the guidelines of CSR policy. CMR is committed to deploy its own environmental and social project activities. All employees are committed in this challenge CSR.
CMR auscultates every year its carbon footprint in order to decrease it. Actions to maximize the transport of raw materials and finished products are at the center of its concerns.
CMR analyzes the life cycle of its products as well as the composition of raw materials to maximize waste recycling. The R & amp; D department focuses its efforts on the integration of sustainable development at all levels of society.
Energy and education are the guidelines of CSR policy. CMR is committed to deploy its own environmental and social project activities. All employees are involved in this challenge CSR.
CMR examines every year its carbon footprint in order to decrease it. Actions to improve the transport of raw materials and finished products are at the heart of its concerns.
We produce and deliver turnkey solar or hybrid power plants for micro-grid, industrial or grid-connected installations.
La solution
HYDROS deployed by CMR makes it possible to hybridize diesel generator installations with solar production and possibly storage.
The transformation of thermal power plants into hybrid plants delivers many benefits to the customers of these facilities:
Our HYLIOS solution is fundamentally reserved for emerging countries largely dependent on thermal production, but releasing significant solar potential.
The complexity of hybrid thermal power plants resides in the dimensioning of the equipment of the thermal part, the storage, and in the piloting. The goal is to deliver a continuous supply of electricity to customers.
Our HYLIOS solution is equipped with an energy flow management and control system, making it possible to meet the use of energy needs. This solution is usable for autonomous and nomadic mini-power plants but also for large hybrid ground installations.
Our energy management system offers many features for:
We design low voltage electrical distribution boards, lifting and automation systems to international offshore oil and gas players. CMR delivers switchgear and energy management cabinets to international operators of production, storage, loading platforms and floating supports (FPSO ships).
CMR is a global player in the petroleum industry. We offer electrical systems for your drilling rigs, ships and wells.
Present on the Asian market, we produce electrical panels and distribution cabinets in cooperation with Siemens and Schneider Electric.
Using reliable and quality components, CMR meets all the obligations of the petroleum industry with complete control of tariffs and deadlines.
We are validated K3AD for the creation and installation of nuclear power plant measuring instruments.
Designed in accordance with nuclear regulations, our equipment operates under accidental circumstances and in accordance with the service life of nuclear power plants. 60 years of know-how. CMR is known as a major global player in the nuclear industry.
We guarantee an total quality of service to our customers: from engineering to qualification including mastery of the supply chain.
CMR guarantees the management of the obsolescence of its products installed in more than 100 nuclear power plants since the 1980s.
We specialize in solutions for nuclear power plants and automation. Our customers regularly call on us for the supply, engineering, installation and maintenance of nuclear temperature sensors.
We supply intelligent control systems to ensure secure operations. We support our clients in the sectors of energy and industry.
CMR carries out your projects from the study, project management, testing, installation, programming, site management and commissioning.
We bring efficient and advanced systems that unite the latest technology.
A global partner: we propose a local clothing thanks to support in our 12 operational sites around the world. A solution adapted to our international customers, with installations all varied and requesting specific needs.
As an EPC, we bring exclusive service throughout the world: engineering, design, procurement, logistics, set-up and commissioning.
Our 60 years of engine expertise allows us to conform and maintain your electrical installations with proven reliability of instrumentation.
We create individual components and complete adequate solutions to the obligations of your engine instrumentation:
CMR offer complete management of the life cycle of products to engine and generator manufacturers. This is made doable thanks to our engineers and an perfected supply chain. CMR is your partner from the design phase to commissioning.
We install and guarantee after-sales service for all your equipment anywhere in the world.
COSTRONIC, a CMR Group subsidiary, puts all its experience in the field of automation and electrical engineering at the service of operators of hydroelectric power stations.
We collaborate for over 30 years with end customers , major design offices and turbine manufacturers to offer turnkey solutions.
We supply all electrical products for hydroelectric power plants with tools adapted to the constraints and needs of operators.
Our control solutions guarantee maximum availability of installations and their daily production. They are based on recent technological innovations to increase your plant and its operation.
With more than 2,500 completed projects, we are recognized as developers of control tools in various areas .
For more than 60 years, we have put our skills at the service of our customers.
Installation of a complete SCADA system package with a central monitoring system.
Designing, installing and commissioning a centralized SCADA system with addition of sensing elements.
Software replacement to improve data synchronization and redundancy.
